Radiant Electric Heat – Yoga Lay-In Heater – drop ceiling mount/suspended

$580.00$810.00

Yoga Lay In Heater by REH CeramiCircuit, the most sought out heater for commercial yoga studios. Perfect for drop ceilings and providing sun-like warmth!

Yoga Lay In Heater by REH CeramiCircuit suspended ceiling heaters have the highest radiant output of any suspended ceiling panel – 425F/218C

  • #1 electric suspended ceiling heater for hot yoga studios
  • Ceiling, T-bar or suspended mount
  • Use with traditional or Wi-Fi controls
  • Three sizes – 2’x2′ @ 625w / 1’x4′ @ 750w / 2’x4′ @ 1250w
  • 10-year warranty
  • Made in the USA

How much heat do I need?

  • Yoga Studio: 15 – 30 watts/sq.ft.

Choose a heater:

Choose finish color: *

White $0.00 Black $0.00

Choose a thermostat, the transformer, and your choice of heat relay(s)

Ecobee3 Lite - Wi-Fi - Low Voltage

Ecobee Lite 3 Wi-Fi Low Voltage Thermostat the perfect pair with a Heating Green heating system for your hot yoga studio.

Ecobee Lite 3 Wi-Fi Low Voltage Thermostat features:

  • The most cost-effective Wi-Fi low voltage smart thermostat
  • Excellent for yoga studios with up to 32 programs per day
  • 120F/49C maximum temperature setting
  • One thermostat per yoga room/space needed

 

Ecobee Smart Thermostat Premium - Wi-Fi - Low Voltage

Ecobee Smart Thermostat Premium - Wi-Fi - Low Voltage the perfect pair with a Heating Green heating system for your hot yoga studio.

Ecobee Smart Thermostat Premium - Wi-Fi - Low Voltage features:

  • voice-enabled smart thermostat with a room sensor
  • great for yoga studios
  • up to 48 programs
  • max temp 120*
  • scheduling - 32 options
  • smartphone/desktop accessible

Check our our new FAQ section and tutorial videos for easy setup.

Transformer - high to low voltage

  • Brings high voltage to power up the low voltage thermostat
  • 24v/40VA transformer, plate mounted
  • Compatible with 120/208/240-volts
  • One transformer needed for one low voltage thermostat

RIBT24P 20 Amp Heat Relay

RIBT24P 20 Amp Heat Relay used with a transformer, thermostat, and infrared heaters to create the perfect infrared heating system.

  • Relays are controlled by the thermostat bringing high voltage to power up the infrared heaters
  • Rated for use up to 3,840 watts/240v or 3,328 watts/208v and 4,432 watts/277v respectively
  • For Lay-In Heaters @ 1,250-watts: Up to (3) heaters can be used at 240 and (2) at 277 and 208 volts per (1) 20-amp heat relay
  • For Cove Heaters @ 1,500-watts: Up to (2) heaters can be used at 240,277, and 208-volts per (1) 20-amp heat relay
  • Adjust the quantity needed in the shopping cart

30 Amp Heat Relay

RIB24P30 30 Amp Heat Relay used with a transformer, thermostat, and infrared heaters to create the perfect infrared heating system.

  • Relays are controlled by the thermostat bringing high voltage to power up the infrared heaters
  • Rated for use up to 5,760 watts/240v or 4,992 watts/208v
  • For Lay-In Heaters @ 1,250-watts: Up to (4) heaters can be used at 240 and (5) at 277 volts, and (3) at 208 volts per (1) 30-amp heat relay
  • For Cove Heaters @ 1,500-watts: Up to (3) heaters can be used at 240 and (4) at 277 volts, and (3) at 208 volts per (1) 30-amp heat relay
  • Adjust the quantity needed in the shopping cart

Yoga Lay In Heater by REH CeramiCircuit Features & Benefits:

  • Install applications: T-bar ceiling
  • Save 30-70% compared to gas, propane, oil or other electric systems
  • Hardwired for 120, 208, 240 or 277 volts.
  • Controlled with hardwired line voltage or low voltage thermostat
  • Reaches full heating potential in 5 to 7 minutes
  • C UL US certified
  • 10-year Limited Warranty
  • Made in the USA

Heat Comparison

The ceramic ceiling heater warms a room faster and can reach higher temperatures than other radiant T-Bar ceiling heaters on the market. It also heats a greater amount of surface area than the compared heater. Look below for a thermal comparison between ceramic ceiling heater and a competing brand’s lay-in heater.

 Heat Retention: 

Once the room is heated to the desired temperature the ceramic ceiling heater turns off. After being turned off for five minutes, the ceramic surface temperature is higher than the compared heater’s surface temperature which had operated continuously for ten minutes. See the comparison below:

Yoga Studio Application

1: Our yoga thermostat allows you to obtain the high temperatures hot yoga studios desire.
2: Panels mount right into the ceiling and give sun-like warmth to the people and objects below.

In this example, a 760 square foot yoga studio is heated by 15 1,250-watt ceramic heating panels. The panels fit directly into a t-bar ceiling grid, commonly used in commercial spaces. They will warm up and heat the people and objects in the studio below to a temperature of 90-105F depending on ceiling height, R-values of insulation, window type/sizes/# of panes or U-value, location, etc.

Specifications

Ceramic Ceiling Lay-in Specifications

Size Watts Volts Amps BTUs
24''x 24''x 1.25" 625 208 3.0 2134
24''x 24''x 1.25" 625 240 2.6 2134
24''x 24''x 1.25" 625 277 2.3 2134
48"x 24"x 1.25" 1250 208 6.0 4268
48"x 24"x 1.25" 1250 240 5.2 4268
48"x 24"x 1.25" 1250 277 4.6 4268

 

 

Documents

 

Installation

 

How Much Insulation Do I Need?

When it comes to insulation we typically tell people that more is better. Having more insulation and higher R-values will help retain warm temperatures in the winter and cool temperatures in the summer so you’re saving money on energy costs year-round.

Click here to find the insulation minimum requirement in your state and county.

In the average American home, 45 percent of the utility bill can be attributed to heating costs. With proper insulation, you can decrease your heating bill while increasing the warmth and comfort in your home.

There are some general guidelines that outline how much insulation you should have in your space. Things like your location, elevation and average temperature range will play a big factor into how much you should insulate. A home in Phoenix, AZ is going to require less insulation than one in Buffalo, NY. The following map and chart from the U.S. Department of Energy provide a good guideline for how much insulation you will need in your area. You can also click here to find the minimum insulation requirement in your state and county.

Types of Insulation

The market is so flooded with options for insulation that deciding on one can be a daunting task. However, exploring the features and benefits of each can help narrow the choices down. Ultimately, it will come down to what will fit in your space, your budget and what R-values you need. Generally speaking, we suggest getting the most insulation you can. When it comes to insulation, more will always help maintain your desired temperatures and keep your heating bills down!

BattsBatts – Batts are one of the most common types of insulation due to their ease of installation and relatively low cost. They are made to fit between joists and rafters. Batts insulation typically comes in blankets or will and can be made of a variety of materials such as fiberglass, wool, cotton and even soy. It’s a great choice for DIY projects.

R Values – 3.0-4.0 per inch (Depending on Material)

Common Uses – Walls, Foors, Ceilings

Blown In InsulationBlown-In – Blown-in or loose-fill insulation consists of fiberous strands of fiberglass or cellulose that are blown into ceilings or walls with a special machine. This type of insulation can be installed as a DIY project with rented equipment or you can hire a professional.

R Values – 2.2-3.8 per inch (Depending on Material)

Common Uses – Walls, Ceilings

Spray InsulationSpray Foam – Spray Foam insulation is a type of liquid that expands into a foam when applied. It can be sprayed into walls, floors and ceilings and will fill those hard-to-reach nooks and crannies. While spray cans of foam insulation can be bought for insulating very small areas, such as around pipes and windows, professional installation is needed for larger applications.

R Values – 3.5-6.5 per inch (Depending on Material)

Common Uses – Walls, Foors, Ceilings

SIPSStructural Insulated Panels (SIPS) – SIPS consist of an insulating material, such as foam, sandwiched by particle board sheets. These sheets typically come in 4’x8’ configurations and are most often used for new construction. They are great due to their ability to insulate an entire wall, but can be expensive to install and to not lend well to remodels or retrofits.

R Values – 3.8-7.7 per inch (Depending on Material)

Common Uses – Walls, Ceilings

 

Where to Insulate

For optimal efficiency, your home should be insulated from the attic ceiling to the basement floor. For tips on where to concentrate insulation consider this graphic from the Department of Energy.where_to_insulate

  • 1: Unfinished Attic – Insulate between and over the floor joists and around attic access door (1a).
  • 2: Finished Attic – Insulate between studs of knee walls (2a), between studs and rafters of exterior walls (2b), and ceilings with cold overhead spaces (2c). Extend insulation into joist space (2d).
  • 3: Exterior Walls – Insulate walls between rooms, garages, storage areas (3a); above ground level foundation walls (3b); foundation walls in heated basements (3c).
  • 4: Floors – Insulate floors above cold spaces such as vented crawl spaces and unheated garages. Also insulate floors cantilevered beyond the exterior wall below (4a); slab flors built directly on the ground (4b); foundation walls of unvented crawl spaces (4c). Extend into joists (4d).
  • 5: Band Joists
  • 6: Windows & Doors– Seal and caulk around windows and doors.

 

Seal Air Leaks

Another key component to properly insulating your home involves making sure it’s well sealed. Air leaks around plumbing vents, doors, windows and other culprits allow cold air to enter, and heated air to escape your home. By sealing these areas, you can improve your heating efficiency. The following image from energy.gov shows some areas prone to air leaks.

Do a Blower Door Test

diagnostic_toolsYou can test for air leaks in your home by doing a blower door test. A professional energy auditor will place “blower door” in your doorway. This is an instrument containing a fan that pulls air out of your home and a series of gauges to measure air pressure. This creates a pressure gradient between your home and the air outside, which allows the auditor to pinpoint air leaks in your home. This is illustrated by the graphic to the right, provided by energy.gov.

Energy Tips

Our heating products are a great start to conserving energy, but there is always more you can do to keep those utility bills lower.

Use a programmable thermostat – You can program these to turn your heaters on and off at set times. For example, you can set them to turn on before you get up in the morning, shut off while you’re at work and turn back on before you get home in the evening.

Insulation is key – Any heating or cooling system will perform best when well insulated. To get the best performance out of your heaters make sure your space is properly insulated. For more on how to insulate your home check out this link from energy.gov

Reduce drafts – Air leaks around plumbing vents, doors, windows and other culprits allow cold air to enter, and heated air to escape your home. By sealing these areas, you can improve your heating efficiency. The following image from energy.gov shows some areas prone to air leaks.

Shopping Cart
wpChatIcon