Build your own indoor heating package!
Use this guide and building tool to make sure you get the right amount of heat you need. If you get stuck at any point make sure you reach out to our team of experts.
Build your Indoor Heater Package
This is a simple 1, 2, 3 step process:
- You’ll need to know the size of your room and how hot you want it.
- Pick a heater type.
- Pick a controller for the heater(s)! That’s it!
Guidelines
- The packages below are for a primary heat source, up to 3800 watts @ 240 volt or 1900 watts at 120 volt.
- If you are unsure if what we suggest is enough heat, go to the next size up.
- The packages below are for a primary heat source.
- For less heat than specified or supplemental, choose a smaller option.
- Know your voltage, if you aren’t sure what you have available read this guide or ask your electrician first.
- If you get stuck or have questions, don’t hesitate to reach out and contact us.
Additional Help
- To maximize performance of our heaters and controls insulate to or above code.
- Always install the heater in line of site of the thermostat.
- To maximize performance of our heaters and controls insulate to or above code.
- Ensure that the thermostat is on an interior wall.
